Steampunk Frigate Terrain

Steampunk Frigate Terrain

myminifactory

This 3D printable model is a steampunk Frigate. You can use the ship as a playable terrain in your tabletop game campaigns. All the different levels can be taken apart so your adventure can take place on different decks at the same time. Several parts of the frigate can be moved after they are assembled with the ship. The harpoon and cannon on the upper deck are meant to be attached with magnets (8mm diameter, 2mm height) and then they turn 360°. The chimney that goes down to the engine room is hollow and if you attach a mini smoke machine to the base of the ship the vapor will come out of the top. Parts that you should add to the frigate after printing are ropes, masts, sails, and a chain for the anchor. Krotitélé Draků used this model in their campaign Za srdcem Azary The post-process you see in the photos was done by RPG Forge The download contains pieces of the model ready to be 3D printed on a 200 mm print bed. All cut parts are placed on the print bed as we would print them to save you time. At 100% scale, the frigate is about 70 cm long, 21 cm wide and each floor level is 5 cm tall. 3D PRINTING SETTINGSSome parts will look much better if printed on an SLA printer. We printed the harpoon on an SLA printer the rest of the parts were printed on a Prusa MK2S.We use these settings for most of our FDM prints: Layer height 0.15 mm Infill 15% Supports 45° For parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion. We try to make the models in a way that uses as little support material as possible.This model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc. Printing settings will vary greatly depending on your specific printer. This model was brought to life by 3Demon. We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for over 10 years. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here: 3Demon Links

Download Model from myminifactory

With this file you will be able to print Steampunk Frigate Terrain with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Steampunk Frigate Terrain.