Starlane GP4 mount for Yamaha R6

prusaprinters

<p>This allows you to install a Starlane GP4 on top of the top yoke of a Yamaha R6 or any bike that has holes on top of the yoke separated by ~125/130mm.</p><p>There are two holders, one at 25 degrees and the other one at 35 degrees.&nbsp;</p><p>&nbsp;</p><p>Hardware:</p><ul><li>2 x heat set inserts M5x10mm ( designed for <a href="https://cnckitchen.store/Gewindeeinsatz-threaded-insert-M5-Standard-50Stk-pcs-p431146833">these </a>from CNCKitchen's store), must be inserted in the holder.</li><li>2 x 5x16mm BHCS, to attach the holder to the plate</li><li>2 x 5x40mm SHCS, to attach the plate to the top yoke</li><li>2 x M5 Nylstop nuts&nbsp;</li><li>1 x M8x45mm (minimum) nut to replace the one that Starlane provides</li></ul><p>&nbsp;</p><p>Print settings:</p><ul><li>ASA (recommended) or ABS</li><li>0.3mm layer height</li><li>Infill 40% min</li><li>No support</li></ul><p>The files are already oriented for max strength / no support.</p><p>&nbsp;</p>