Stargate Keyholder

prusaprinters

<p>This is the bigger cousin of <a href="https://www.thingiverse.com/thing:2459582">https://www.thingiverse.com/thing:2459582</a><br/> Because I have more and bigger keys now :)</p> <h3>Print instructions</h3><h3>Category: Keychains Print Settings</h3> <p><strong>Printer Brand:</strong> Prusa</p> <p><strong>Printer:</strong> i3 MK2.5</p> <p><strong>Rafts:</strong> Yes</p> <p><strong>Supports:</strong> No</p> <p><strong>Resolution:</strong> 0.1</p> <p><strong>Infill:</strong> 20</p> <p><strong>Filament:</strong> Prusa, Prima Select PLA, PET Silver, Transparent Yellow<br/> <strong>Notes:</strong></p> <p>The chevrons were printed in transparent yellow PET and are press fit. You should not need glue.</p> <p>I used brims on the smaller parts, particularly the spacers so that they don't fall over or slip off the bed.</p> <h3> Post-Printing</h3> <p><strong>Assembly</strong></p> <p>I used M4 hardware to put it together. The machine screws are M4x30, you could use shorter ones, but remember to scale the spacers accordingly before printing.<br/> Locking nuts are recommended!</p> <h3> How I Designed This</h3> <p>Designed in Fusion 360, the artwork was imported from Inkscape.</p>