Star Wars Rebellion + Rise of the Empire Boardgame Insert

prusaprinters

<p>This is an insert for the Star Wars Rebellion boardgame + Rise of the Empire expansion.</p><p>There is plenty other inserts in thingiverse for this game, but this is why I prefer mine:</p><ul><li>All pieces are printable in a 210x250 bed. No gluing required.</li><li>All components and units fit in their own boxes. No sharing of boxes.</li><li>Does not use as much material as other inserts I have seen out there.</li><li>No oddly shaped boxes. All of them are square.</li><li>Uses the space in the box effectively. There is even some leftover space at the top.</li><li>Cards are not stored horizontally (difficult to pick up).</li><li>Cards are not stored vertically (waste of space).</li></ul><p>Can easily separate units and leaders to set up the game<br>The only drawback here is that it the card trays are not large enough for sleeved cards.</p><p>The trays for units and ships are inspired on <a href="https://www.thingiverse.com/thing:4232576">https://www.thingiverse.com/thing:4232576</a>.</p><p>You will need to print 2 of<strong>ship-2-needed.obj</strong> and 1 of each of the other files.</p><p>You will also need 2 leader boxes.</p><p><br>The card trays have some dividers (included in the file) that you also need to print separately.<br>You will need 5 of the dividers for the big tray and 4 of the dividers for the small tray.</p><p>This can be accomplished by using the "Spilt" feature in PrusaSlicer</p><h3>Print Settings</h3><p><strong>Printer Brand:</strong> Prusa</p><p><strong>Printer:</strong> I3 MK3S</p><p><strong>Rafts:</strong> No</p><p><strong>Supports:</strong> No</p><p><strong>Resolution:</strong> 0.30 mm Layer height</p><p><strong>Infill:</strong> 15%</p><p><strong>Filament:</strong> PLA</p><p><strong>Notes: </strong>I used a 0.6 nozzle but smaller nozzles would work well too (I may take longer to print)</p>