Star Wars - Kenner Figure Stand

thingiverse

This is a stand I've designed for a friend who has an impressive collection of original Kenner Star Wars figures. The stand will hold 72 figures on its 9-tier design. A lot of work has gone into making this stand printable with minimal support and therefore less filament required. The stand can only be printed on a 400x400 bed, but you're welcome to cut up the STL files if needed. We've just finished printing all the parts and haven't yet assembled or painted them. We'll upload a picture of it fully built and assembled soon. I haven't found anything like this out there so far, and I think it would be a unique piece to display your figures on if you're also a collector. Update no.2 21/12/19: Finally got around to updating all parts to make them interlocking and easier to assemble - use all the parts with V2 in front although a couple of them haven't changed in dimension (back plate and support beams) - I have made some of the detail stand out a little more also. I've also made the new platforms with no pins and a separate printable pin file on a 12mm base that has an insert on the platform. Haven't tried printing but tested them all in my slicer and they seem to slice fine with no issues....Let's see some makes now as there are quite a few downloads and views!! You will need to print 4no. "Platform_Left_Shift", 3no. "Platform_Right_Shift" as well as the Top and Front Platforms, 8no. Platform_Detail, 1no. Front Platform Detail, Back, Sides and 2no. Support Beams, oh...and 72 pins if you plan on using all of them. Cheers and Merry Christmas, Happy Holidays! Update no.1 12/11/19: Fully printed, assembled and primed picture now included. I found the pins a little fragile and broke a couple accidentally so I've included a separate STL file so you can print some spare pins to glue down. Assembly wasn't that easy, will perhaps work on the parts to make them more interlocking to help with this when I get a chance. Also, whilst the detail looks great on each step, much of it is not all that visible when filled with figures so I may simplify it a little to help with print times.