Star Wars Jedi Order Extruder Visualizer

prusaprinters

<p>Star Wars Jedi Order Extruder Visualizer 3D printed in 2 colors, white and black.</p><p>I do not have an Multi Material Unit (MMU) for my Prusa. I had to insert a filament change command in the G-code so I could change the color. It can be done very easily in the PrusaSlicer.</p><p>I separated the magnet post so I could print without supports. The post needs to be glued to the back with super glue.</p><p>The magnet used is 6.3 mm diameter by 3 mm thickness. They were purchased from Michaels Craft Store.</p><p>It was brought to my attention that the new Prusa printers, probably starting from beginning of 2021, the metals in the stepper motors are non magnetic. I would advise to test with a magnet to see if the visualizer will stick to the stepper motor.</p><h3>Print instructions</h3><p>Printer brand:<br>Prusa</p><p>Printer:<br>I3 MK3S</p><p>Rafts:<br>No</p><p>Supports:<br>No</p><p>Resolution:<br>.15 mm</p><p>Infill:<br>15%</p><p>Filament_brand:<br>Prusament</p><p>Filament_color:<br>Vanilla White &amp; Prusa Galaxy Black</p><p>Filament_material:<br>PLA</p><p>Notes:<br>Added brim for the magnet post so it would have more surface area to stick to the print bed. Also, the post prints at 100% infill.</p><p>Post-Printing<br>Magnet Post need to be super glued to the back. Magnet needs to be supper glued to the post.</p>