Star Realms Card Boxes - Base & Crisis

thingiverse

I haven't printed all of these yet. I'll mark the tested boxes as "verified" on the Instructions page as I check them. These boxes fit the cards for the card game Star Realms perfectly. The Base box stores all the cards for the base set, and the Crisis box fits all the combined cards from the four Crisis expansions. The tolerances between the cards and the box are pretty tight, so the tabs don't allow the lid to close properly. But, I was able to solve this by breaking the tabs off - now the lids fit nicely onto the bases without any issues. The lids come off easily yet stay in place; The cards don't get stuck in the base because they have enough room to move around. I made a customized version of http://www.thingiverse.com/thing:137961 using Customizer! - you can find it here: http://www.thingiverse.com/apps/customizer/run?thing_id=137961 Instructions Print the boxes however you want to store your cards. Having all the base cards in one box can make for a box with some fragile edges, so I created some smaller boxes to fit different types of cards. Here's what fits in each of the boxes. StarRealms_All_Base_Set.stl (Verified) Holds all cards in the deck, including point cards, starting hands, Explorers, and faction cards. StarRealms_FactionCards.stl: Holds all faction cards. This is everything except the Explorers, Starting hands, and point cards. StarRealms_ScoreEtc_x2.stl Holds two sets of Explorers, starting hands, and point cards. StarRealms_Crisis_or_ScoreEtc.stl (Verified) Holds either: - All the point cards, Explorers, and starting hands from one deck - Or all the cards from all four Crisis expansions Here are the customizer options I used: StarRealms_All_Base_Set.stl: CARD_STACK_HEIGHT = 42 StarRealms_FactionCards.stl: CARD_STACK_HEIGHT = 27 StarRealms_ScoreEtc_x2.stl: CARD_STACK_HEIGHT = 32 StarRealms_Crisis_or_ScoreEtc.stl: CARD_STACK_HEIGHT = 16.5 All Card Boxes: CARD_SIZE_LONG_EDGE = 90 CARD_SIZE_SHORT_EDGE = 65 WALL_THICKNESS = 2 TAB_THICKNESS = 4 EXTRA_SPACE = .25 END_CUTOUT_HEIGHT_PERCENTAGE = 80 END_CUTOUT_WIDTH_PERCENTAGE = 67 BOTTOM_CUTOUT_WIDTH_PERCENTAGE = 67 BOTTOM_CUTOUT_LENGTH_PERCENTAGE = 67