Star Citizen Aegis Redeemer

thingiverse

Update: 01/22/22 Separated turret guns from the turrets as the guns needed reworked to solidify for small printing. You loose a bit of detail but it prints much better. Print the turrets, then print the guns and glue on. Resize the guns down ~40% to fit the small turret. There is also an ALL turrets .stl to print all the guns at once. NOTE: Also added an optional file "Mixed_Guns.stl" which is a collection of Star Citizen guns I've successfully printed in the past for my own models. Cut and resize what you need. Update: 01/21/22 Some thin walls in model added repaired .stl file "body_split_Front_Repaired"q Update: 01/15/22: Added single turret ring as one comment was that it would not download. Re-meshed, and re-saved a single ring Update: 01/11/22 Fix for rear body section for internal overhang that may cause loose filament to drag about and pooch the print. Or nothing at all would happen, what do I know, I write software for a living. Aegis Redeemer model fixed, remeshed and broken down into parts. There are two versions of the gear doors. Gear_Doors_Open.stl - If you want to glue on the landing gear Gear_Doors_Closed.stl - If you want no landing gear, E,g, in flight. Also there was no landing gear model so I made some best I could, I'm no artist. I tried to resize most of the assembled area, E,g, the turret hole, Wing thinble, etc. so that minimal sanding would be needed for assembly, but I have no plans on printing this model, so I can't test that they all fit nicely without some sanding. You may want to experiment with placement, infill, and print speed for the smaller parts like gear doors, landing gear, and turrets. My model of the Talon took a bit to situate the parts for a good print. When I print smaller things I print them vertically @ 100 infill and bump the speed down to 90% Please let me know if you have any issues, fix-up the landing gear, praise me, whatever. Thanks.