Stangenlager / Lagerplatz fuer Stangenmaterial bis 1,0m

thingiverse

ReadMe.txt Stangenlager Application: For storing rod material, for example, threaded rods consisting of two 50mm drain pipes L = 1.0m and L = 0.5m as well as various pipe clamps and dust protection end caps, the entire thing can be mounted below a shelf. A set of 30mm spacers can optionally be added. Material: PLA Layer thickness: 0.2mm Fill density: 25% Printed with: Anycubic i3 Mega Modification: None Additional settings: Shell thickness [mm]: 1.2 Bottom/Top thickness [mm]: 1.2 Print speed [mm/s]: 50 Printing temperature [°C]: 200 Bed temperature: 60 Support Type: None Platform adhesion type: None Line count: 3 Start distance [mm]: 3 Minimum length [mm]: 150 Filament diameter [mm]: 1.75 Flow [%]: 100.0 Noodle size [mm]: 0.4 Post-processing: Drill M3 threads for securing screws. Bill of materials: 2 pieces Pipe clamp_51-5mm_Type1 2 pieces Riser_30mm_f_Pipe clamp_Type1 2 pieces Pipe clamp_51-5mm_Type2a 2 pieces End cap_50mm_Type2 2 pieces End cap_Type_4 1 piece HT pipe 50 x 1.8 mm L = 100cm 1 piece HT pipe 50 x 1.8 mm L = 50cm 2 pieces Threaded rod with internal hexagon M3x10 DIN 913 4 pieces Threaded rod with internal hexagon M3x5 DIN 913 4 pieces Flat head screw 6x25 (without Rizer) **1) 4 pieces Flat head screw 6x55 (with Rizer) **1) **1) Execution and length can be individually adjusted. Print time: 1 piece Pipe clamp_51-5mm_Type1: approximately 2 hours 1 piece Riser_30mm_f_Pipe clamp_Type1: approximately 2:40 hours 1 piece Pipe clamp_51-5mm_Type2a: approximately 2:30 hours 1 piece End cap_50mm_Type2: approximately 1:30 hours 1 piece End cap_Type_4: approximately 2:15 hours Optimizations: None Practicality: "good" Designed with: Freecad V018 2019-10-08 FrankWL