Stands for Action Figures

Stands for Action Figures

thingiverse

These are stands for action figures. To print them, you must load the selected base and label into your preferred printing software along with a peg. The peg should be positioned according to each figure's foot separations within the base limits. You may need to scale the peg to achieve the best results - its diameter or height could vary depending on the design. Some dimensions of the labels may also require adjusting, so this is still a work in progress. Print Settings Printer: PrintRite Colido 2.0 3D Resolution: 0.15 mm Infill: 20% Post-Printing The insert-in parts of labels and stands may need to be filed down after printing. The edges of the clips on the base and between bases could also require filing. How I Designed This I wanted to design a stand that would save PLA filament while still being innovative. My goal was to create a base that could hold a label with each figure's name, allowing them to be displayed side by side while optimizing space between them. I started with a standard diameter of 50 mm for the base and experimented with different width dimensions to make some variants of the original design.

Download Model from thingiverse

With this file you will be able to print Stands for Action Figures with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Stands for Action Figures.