STANDS FOR 3RONCO Car

cults3d

Hi guys, Made these stands for the 3ronco RC car model (also found here on Cults). These are nice to have while assembling the car and also for display when the car is fully assembled. No supports are required to print these files but you need to rotate them on the slicer (sorry for that). To assemble the parts, you need a few M2 screws. To install the small round pieces on the back of the rear bumper you need a couple of M2x20 screws. You can also check my stands just for the chassis here (also very handy to have while assembling and installing the components on the chassis): https://cults3d.com/en/3d-model/gadget/stands-for-3ronco-chassis