Standing Desk Cable Chain Remix

prusaprinters

The cable end link is designed to be attached to the underside of a desk. I added a cutout for a command strip with the adhesive section cut down to 50mm L. I ended up using a pair of hook and loop command strips for this, but any kind should work. Alternatively, if you're okay with a more permanent solution you could simply glue around the edge and stick it to the desk.Tips:The underside of the links will likely have some defects due to the overhang, but if you clean them up a bit it won't hinder the chain's movement. I used a file and some sand paper.I recommend using a deburring tool and sanding the holes in the links, it will still work without this step but the movement won't be as smooth.I recommend working the chain in by hand before installing it, this will help to smooth out the movement.For reference I used standard PLA with 15% infill and had no issues. My best results have been in the prusa slicer using snug rectilinear supports and the automatic support painting tool.