Stand for Logitech Keys to Go & iPhone (with Spigen Case)

thingiverse

If you have an iPhone with this type of case: https://www.amazon.com/gp/product/B010MVRC20/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 and want to use it with a Logitech Keys to Go Keyboard like this: https://www.amazon.com/gp/product/B00TEVGK3M/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=A2AWKZBCPMNLY2 Then this is the thing for you. Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator Rafts: No Supports: No Resolution: "Low" Infill: 10% Notes: I just used default "Low" settings for speed. I printed one of the 2 inch wide stands and two of the 1/2 inch wide ones. Print them on their side with the complex profile "face down". I press fit the wide one in the middle of the keyboard, and then put the two narrower ones on either side and move them out away from the center to provide any additional support as needed but to be out of the way when the phone is in portrait orientation.