Stained Glass Sugar Skull - Filament Painting

prusaprinters

AVAILABLE FOR COMMERCIAL RESALE WITH TIER 2 - V2 FRAME ONLYVideo of the print: https://www.instagram.com/reel/C8cbHaQur2-/?utm_source=ig_web_copy_link This complex color/low waste model uses 9 different colors (11 instances). AMS/MMU not needed. Manual filament swaps can easily be done with pauses. This model will only be available to club members.I have included 2 different 3MF files for Bambu Studio. One for people with AMS unit(s), and one for people with NO AMS with pauses already set (manual color changes). I used 2 AMS units to print this and assigned color 9 to slot 1.  If you have 1  AMS you can assign the filaments based on the reference chart below. If you do not have Bambu Studio/Orca I recommend using it to look through the settings and copying them to make a Hueforge profile template for yourself in your slicer of choice so that future prints will be quick.  Pro Tip: If you are using more colors than you have AMS units you can manually unload the last spool after the print starts. With 1 AMS when it gets to slot 4 in the print it will error and force a pause. You can then load the new colors (5-7) in AMS slots 1-3 then put color 4 back in and repeat this process by unloading color 4 when it is complete it will pause when it is time for color 8. With 2 AMS you can do the same above just with AMS slot 8. It will pause at 8 then you can load color  9 into your AMS slot 1. You don't have to let it force pause if you make it back in time to swap. This is handy if you are worried about missing the timing of a spool swaps. The black is only used once in this print which is why I chose slot 1 for color 9.If you have any questions about printing this hit me up. AMS SLOT GUIDE: The model colors will go in and be assigned to the following slots depending how many AMS units you have.MODEL COLOR - [1] [2] [3] [4] [5] [6] [7] [8] [9] 1 AMS - SLOT ---- [1] [2] [3] [4] [1] [2] [3] [4] [1]  2 AMS - SLOT ---- [1] [2] [3] [4] [5] [6] [7] [8] [1] 3 AMS - SLOT ---- [1] [2] [3] [4] [5] [6] [7] [8] [9] Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. The profiles have a height modifier to print the first 0.48mm @ 0.16 layer height as that is the min depth/non blended portion of the base color. If you use a different slicer set all your color changes before doing the modifier as it changes the amount of layers. This shaves off approximately half an hour of print time. Filaments Used:PLA BambuLab Matte Charcoal Transmission Distance: 0.6PLA PolyLite Blue Transmission Distance: 1PLA Bambu Lab PURPLE Transmission Distance: 5PLA PolyLite Azure Blue Transmission Distance: 3PLA PolyLite Aqua Blue Transmission Distance: 2.5PLA BambuLab Basic Jade White Transmission Distance: 5PLA PolyLite Purple Transmission Distance: 0.7PLA BambuLab Basic Pink Transmission Distance: 8.5PLA Bambu Lab Magenta Transmission Distance: 3This print uses 9 unique filamentsSwap Instructions:Start with CharcoalAt layer #6 (0.56mm) swap to BlueAt layer #8 (0.72mm) swap to  Bambu PURPLEAt layer #9 (0.8mm) swap to Azure BlueAt layer #11 (0.96mm) swap to Aqua BlueAt layer #14 (1.2mm) swap to Jade WhiteAt layer #15 (1.28mm) swap to Polylite PurpleAt layer #16 (1.36mm) swap to PinkAt layer #18 (1.52mm) swap to Bambu PURPLEAt layer #19 (1.6mm) swap to MagentaAt layer #21 (1.76mm) swap to Jade White for the rest.