Stacking Mini Storage Shelf

cults3d

This is a storage shelf system to allow you to store any size of minis that you like. The shelf system allows you to move the shelves up or down as needed along the multiple rungs. This results in up to 3 or 4 shelves per storage unit. Each tray can hold roughly 25-36 minis of 25mm or 1 inch base. There are two system designs of 5 inch tall and 7 inch tall. Depending on your storage space, remember the height of the minis when considering which to print. Due to design, there is little support to keep the top front portion in proper alignment. The clips are optional prints to glue to the front of a tray. This will help align the main sides to the proper distance. You will only need to print one or two sets per system and keep them on the top shelf positions. There is a hollowed out tray and a solid tray available. I prefer to magnetize my models and use metal as a storage solution. I glue sheet metal to my trays for my need. This allows you to adapt the storage to your preferred style. There are trays designed by another creator that will work with this storage solution. Their trays allow you to slide your minis in a slot that will hold them in place. I will link below. Assembly: 1 - Left and Right Main, or Small Left and Right Main 2 - bottom supports 2 (3) - Back Supports (3 for full size) 1 - Left and Right Clip (Or more if desired) infinite trays as your heart contents -The back supports should fit over the pegs of the main sides. Slight trimming might be needed. Super glue to ensure a snug fit. -The bottom supports snap into the main sides. Flat surface on the bottom. Again super glue for snug fit. -Clips should be glued on the front of a tray Acknowledgement: This was inspired by the "Mini Storage Tray and Shelves" designed by TheTrebor on thingiverse https://www.thingiverse.com/thing:3015365 I found the shelf system lacking and redesigned everything to meet my needs. The trays from that system will work with this.