Stackable ESP32 Enclosure (IoTStax)

prusaprinters

ABOUT THE ENCLOSUREThis enclosure is a part of the IoTStax series, that are easy to print, and are able to be combined in stacks for easy mounting. Once printed, you can mount an EPS32 module with M2 bolts (8mm or 10mm), before either stacking on top of a general mounting plate, or other IoTStax modules (more info below). The lid is a tight friction fit to the base, but has recesses to help remove the lid.USEFUL LINKSHere's a guide to getting started with ESPHome: Getting Started with ESPHome and Home Assistant — ESPHomeNote that the enclosure mounting holes are specific to a certain AZDelivery ESP module. I got mine here: https://www.amazon.co.uk/gp/product/B08BTWJGFX PRINTINGFlip the Lid 180 to ensure that it's sitting correctly on the bed. The Base does not need to be rotated or changed. No supports are needed.EQUIPMENT NEEDEDThe following equipment is needed for this:4x M2 (8mm or 10mm) bolts for mounting the module into the enclosure2x 8mm diameter magnetsOPTIONAL: IoT cables (e.g. dupont) for connecting to other boardsSTACKINGThe base features two holes for inserting 8mm diameter magnets. The fitting should be a tight friction fit, but you can use glue if needed. Pay attention to the orientation of the magnets. The magnets will be 60mm apart, which you can then use to stack either ontop of a IoTStax general Mounting Plate, or other IoTStax modules, e.g. SIM800L, SDS011, etc..LINKS TO COMPATIBLE IOTSTAX COMPONENTSIoTStax: Stackable Mounting Plate by Scheimann | Download free STL model | PrusaPrintersStackable SIM800L Enclosure (IoTStax) by Scheimann | Download free STL model | PrusaPrintersVERSION CONTROL20211230: Initial version20220115: Made the recesses to remove the lid larger, as well as giving the magnet recesses a lip, to better capture the magnets