SSX303 HOP-UP Guide

thingiverse

!!!! double check if the gap and treats linedup from the 3d part to the hopup TDC if this is not the case let me know i correct it for you,, bacause the hole is out center of the hopup guide because it is on my ssx303 lined up with the TDC gap. also the 3dpart have only a round gap that tap it self when screw the bolt in !!!!! i had out of the box the issues with the wheel and treats, treats are go bad and the bolt was wiggle and not even turn up or down the hopup because of the play between treats and bolt.. so,,, Its just a small peace of plestic nothing special but i made it not press fit so any force with a handle of a small tool (woot/rubbery) needed ( just hammer it in the rail with policy) there are a few downsides on this mod... first of all when you need to take the rifle apart,, yes you need to uninstall the hopup bolt, second thing is it does not fit the novritsch scope any more like it shut be because of the bolt that sticks out.. however!, i made it with the idea to give the 3d print guide not any chance to fall out so i want to lock it in with the novritsch scope mount (look pictures) but the scope is a bit furder away then you maybe want (for me its still fine with the stock all the way in) the first 7 gaps in the rail from the back side will be not in use anymore, but.. with the novritsch scope there is a way to eliminate this but yea its up to the owner if ya want that, so you can make a gap in between the mount stands but you have be handy to do that and use the right tools,, i think most of us are able to to that,, but only if you want ofcourse, it its up to you. you also can use diffrent mounts on the scope or if you dont use a novritsch scope it wil be two parts insteat of one peace mount like the novritsch. and then its maybe a good chance to use the rails but not to lock the 3d part (i still want to make a 3d part to lock it in but for now this is what it is) i use ofcourse a M4x30mm bolt with a six size head it can shorten a bit but i think its fine to use it like this and on top of the bolt you can glue a grip head i also made for it. if you have a spring that fits the bolt treats use it it wil be more locked, ectually the 3d print part wil also lock the bolt a bit. i cut the spring shorter because i had no shorter springs. i still use the stock hop up TDC but i still want to upgrade it with a STALKER TDC something that is even more durable that the stock TDC plestic !!! it's not a spectacular mod so nothing special but as yet i am not responsible for any damage to your rifle so its your own risk. Printing: Walls : 3 Infill : i like 30% gyriod but if you want 15% its fine i just print this with ASA but it is not really needed to print it with ASA you can use PLA or PETG or ABS but i like durability. maybe at least PETG for a bit stiffness and durability