
SRAM S7 Gear cable gauge
thingiverse
Adjusting the Cable Length Setting on Your SRAM S7 Gear Clickbox. To ensure proper gear shifting, it's essential to set the cable length correctly. The process may seem intimidating at first, but don't worry, we've got you covered. To get started, locate the gear clickbox on your bike and identify the barrel adjuster. This is where the magic happens. Next, loosen the barrel adjuster by turning it counterclockwise until it becomes loose enough to move freely. Now it's time to set the cable length. The SRAM S7 Gear Clickbox comes equipped with a built-in cable stop. To find this feature, look for the small screw located near the barrel adjuster. This screw will help you fine-tune the cable length. To set the correct cable length, follow these steps: 1. Pull the cable tight by turning the barrel adjuster clockwise until it's snug. 2. Next, turn the barrel adjuster counterclockwise while keeping tension on the cable. This will allow you to move the cable stop into place. 3. Once the cable stop is in position, tighten the barrel adjuster clockwise until it clicks into place. Now that you've set your cable length, make sure to test your gear shifting by shifting through different gears. If everything feels smooth and effortless, congratulations! You've successfully adjusted your SRAM S7 Gear Clickbox's cable length. However, if you experience any issues with gear shifting, don't worry. It's not uncommon for the initial adjustment process to take some trial and error. Just remember to refer back to these steps and make adjustments as needed until you achieve perfect shifting performance.
With this file you will be able to print SRAM S7 Gear cable gauge with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on SRAM S7 Gear cable gauge.