Sprite Pro 4010 blower mount
thingiverse
The 5015 is too loud for me so I went with another 4010. I'm using the same 4010s for the hotend and parts fans now - https://www.amazon.com/gp/product/B07L2WTH7H/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 This is to be used with either the original backplate from https://www.thingiverse.com/thing:5436876 or my updated backplate from https://www.thingiverse.com/thing:5875505 I opted to desolder the cable from the 4010 and solder on a new cable with the JST 1.25 already attached. Not sure if you can still only paste one Amazon link here but here's what I used: FTVOGUE 10 Pairs JST Angle Connectors, 1.25mm 2-Pin Electrical Male and Female Connector Plug with Wires Cables https://www.amazon.com/gp/product/B07N794CZC/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Note the position of the positive pin on the original fan vs the new cable... I had to run black to positive as the connector is swapped on the new cable. Other than that, I used 4x M2x6mm hex cap head bolts and 4x M2x2mm heat insets. If you don't want to use the heat insets, I'll have a version with smaller holes to fit just the M2 bolts shortly. I'm also working on an integrated fan grill.
With this file you will be able to print Sprite Pro 4010 blower mount with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Sprite Pro 4010 blower mount.