Spring Delta/kossel bed support for 2020 bar

thingiverse

Spring Support that Fits on a 2020 Bar with an Aluminum Heatbed + Glass Plate (Total Height 6mm) Printed with PETG or ABS for Having No Problem with the Heatbed Temperature. I Use Three of These on a Delta/Kossel Plus from Anycubic with a 240 mm Heatbed + 240 mm Glass Plate. It Can Also Be Used with a Different Model/Size Printer. The Updated Version Can Be Used with a 3mm Tall Bed (Only Glass or Only Heatbed). You Need the Following Materials: -1 M3 Screw and 1 M4 Nut for Fixing the Plate; -1 M4 20mm/25mm Screw and 1 M4 Nut to Fix to the 2020 Bar; -1 Spring (Max 8mm Diameter), the Length Depends on the Length of the M4 Screw and the Force of the Spring. Uploaded the Base_2020_V2, It's More Stable and Grants the Screw to Stay Vertically Fixed. The Base Now Requires Three M4 Screws: - Two Are Used with Two Square Nuts or T-Nuts to Fix the Base to the 2020 Bar (I Use 8mm Length Screws); -One Is Used to Support the Bed (25mm/30mm Length), This Screw Is Fixed to the Base Through Two M4-7mm Square Nuts (One Upside and One Downside). I Suggest Using Two Washers at the Ends of the Spring. Uploaded the Base_2020_V2 for Standard M4 Nuts Instead of Square Nuts, Same Requirements as the Square Version, Only Different Type of Nuts. Uploaded Bed Support for 3mm Tall Bed Version (Only Glass or Only Heatbed). Renamed All Files, It's All More Clear Now.