Spraycan holder (No rattle and side movement)
prusaprinters
<p>There are many can holders out there but many of them is not usable for mechanics on the move because they do not “hold” the can and stop it from ratteling around in the car / truck.</p><p>note there is a small recess on the backside for dubble sided tape its more easy to line several up before self tapping screws ect.</p><p>Motorsport service trucks and van life will love this holder.</p><p>Will also fit some pegboard systems 100mm between holes </p><p>Printing (See below for update): PETG and 0.4 nozzle and 0.2 layers , keep walls to a maximum around the “ears” of the holder (weakest point) and most settings will be fine. UPDATED !</p><p>Update: I have tested with Spectrum ASA 275 and printed in 0.3 layers and printed in standing orientation with minimal “Snug” support it works very well and are near perfect every time and support comes off easy, print time is just over 6 hours.</p><p> </p>
With this file you will be able to print Spraycan holder (No rattle and side movement) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Spraycan holder (No rattle and side movement).