Spray Bottle Wall Hanger

prusaprinters

<p>A very simple, but effective spray bottle holder.</p> <p>No supports needed, just print, mount, done. (Mount with standard drywall screws, or whatever you have. Mount holes are 4.5mm diam, with an 80° taper, to 9mm head diameter.)</p> <p>Took about 3 hr to print on an Ender 3.</p> <p>I've included the Fusion 360 file in case you'd like to make some tweaks. Width is parametric in case you have a wider squeeze lever. I also included a STEP file for those with other CAD software.</p> <p>EDIT: Added an "extra wide" version that's 36mm edge to edge vs the original 26mm shown in the pictures.</p> <h3>Print Settings</h3> <p><strong>Rafts:</strong></p> <p>Doesn't Matter</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div> <p><strong>Resolution:</strong></p> <p>0.2mm layers (0.4mm nozzle)</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>Any</p></div> <p><strong>Filament:</strong> Any PLA or PLA+ Any</p> <p><br/> <p class="detail-setting notes"><strong>Notes: </strong></p> </p><div><p>Up your wall count so the thin sections (sides/back) are solid as it's stronger and will likely be a faster print than using infill. Still ok to have infill on the beam that is horizontal.</p> I used a brim to ensure it remained firmly attached to the build plate and just cut it away with a debur tool. Not required, just a helpful tool to ensure first time success. </div></p></p> Category: Household Supplies