Spray Bottle Hanger (Improved for Strength)

prusaprinters

<p>Updated the original design to incorporate improvements based on real world use. Still no supports needed and basic print settings work just fine. There are numerous versions including "decorative" designs. I look forward to seeing other remixes posted to Printables.</p><p><strong>1:</strong> Switched print orientation for strength (hypotenuse prints on bed so the load on the filament strands are in direct tension, or compression. [depends on mount orientation]) This modification ensures no issues with 'de-lamination' of print layers under heavy load do to potential poor layer adhesion.</p><p><strong>2:</strong> Prints in under 2 hours for the basic design (use 3 walls so there is no infill in the beam support) [Fancy print options with designs will take closer to 3 hours]</p><p><strong>3:</strong> Updated license for remix to allow sales of printed parts (not the files please, they are intended to be free for all to use)</p><p><strong>4:</strong> Symmetrical "seat" allows to mount in two orientations based on user preference.</p><p><strong>5:</strong> Same overall dimensions of the original (only change is no more radius on the hypotenuse beam support).</p><p>Please feel free to remix with additional tweaks to add variety of options for future users of the design/prints. Fusion360 file or step file available upon request.</p><p>Note: 1 gallon of water weighs 8 lb, and this design can hold at a minimum 25 lb proven by test with just one mount screw.</p>