Spotlight GU5.3

thingiverse

I needed a compact spotlight, so I rummaged through my supplies and found some high-quality LEDs with a GU5.3 socket designed for 12-volt systems. To create the spotlight, you'll need the following hardware: Two small screws to secure the socket to the skirt-like component; I used M3 screws with a tiny head. One M4 screw, about 15mm long or equivalent, as the horizontal hinge. One M3 screw, approximately 12mm long or equivalent, as the vertical hinge. A single M3 nut for assembly purposes. You'll also need a GU5.3 lamp and the socket itself to complete the spotlight. Keep in mind that I haven't tested this setup with halogen lamps; while it might work with low-power ones, I wouldn't recommend using them without thorough testing.