Spool holder & more - supports bobines et accessoires modulables

thingiverse

Here is the rewritten text: https://clubdagoma.popsell.com/max-38805/223433 https://clubdagoma.popsell.com/max-38805/225238 This kit is a versatile, modular, and customizable package that allows you to equip yourself with various spools of different sizes and accessories for your prints. The kit supports spools weighing from 200gr to 3kg, as well as solutions for storage, tool holders, etc. There are dozens of possible configurations! A secure fixation is provided, which is 100% printable and requires no modifications, hardware, drilling, or other tools, whether using a Dagoma cabinet or not. To install the "spool holder & more" ADD-ON, simply follow these steps: 1. Print the necessary components. 2. Install the chosen body attachment along with its locking mechanism (screw or clip). 3. Attach the spool support or accessory to the body. 4. Place the "LOCK" key in position to secure the system. 5. Remove the key using a fine screwdriver through the hole on the opposite side of the key insertion point. 6. Install the adapted rollers for the chosen support (for spool supports). 7. And it's functional! PRINTS: The spool supports, body attachments, rollers, clips, screws, and LOCK keys should be printed with 33% infill for added security. Accessories such as boxes, storage trays, etc. can be printed with 17% infill, which is sufficient. No support materials are needed, except for the internal support of the body attachment (corps de fixation). DETAILS OF THE KIT COMPONENTS: * A simple spool holder body attachment for cabinets (33% - 0.20mm - support everywhere) * A reinforced double-body spool holder attachment for cabinets (33% - 0.20mm - support everywhere) * A low-vis screw spool holder attachment for supports (33% - 0.20mm - support everywhere) * A high-vis screw spool holder attachment for supports (33% - 0.20mm - support everywhere) * Short rollers for spools up to 1kg (33% - 0.20mm - no support) * Long rollers for spools up to 3kg (33% - 0.20mm - no support) * A clip for holding the Dagoma cabinet without drilling (33% - 0.20mm - no support) * A LOCK key for securing the supports (33% - 0.20mm - no support) * A screw for tightening the body attachment with screws (33% - 0.20mm - no support) * A spool holder up to 1kg (33% - 0.20mm - no support) * A spool holder up to 3kg (33% - 0.20mm - no support) * A SD card and USB support (17% - 0.20mm - no support) * An SD card, USB, and spatula support (17% - 0.20mm - no support) * A simple box support (17% - 0.20mm - no support) * A box, SD card, and USB support (17% - 0.20mm - no support) * A box, SD card, USB, and spatula support (17% - 0.20mm - no support) * A box with one clipable option (17% - 0.20mm - no support) * A box with two clipable options (17% - 0.20mm - no support) And the list will continue to grow based on demand!