Sponge BOB harddrive case Sata / BOB l'éponge Boitier disque Dur

cults3d

HDD 2.5, SATA or SSD enclosure This is an accessory that allows the installation of a hard disk drive 2.5 SATA or solid state drive with a cord, Generic Adapter USB 3.0 / SATA 2.5 "SSD-HDD self-powered, to make an external drive. 4 screws of 3mm x 15mm are used for fixing the disc to the box 2 screws of 3mm x 30mm are used for closing the case 1 Rilsan is used to keep the USB cable under pressure in the case. The thread outlet is made of filaflex Layer thickness: 0.2 Shell thickness: 0.8 Fill rate: 20% Print temperature: 220°C Media type: none Case for 2.5-inch hard disk drive, SATA or SSD This accessory allows the installation of a 2.5-inch SATA or solid-state drive with a cable, Generic USB 3.0 / SATA Adapter "SSD-HDD self-powered", to make an external drive. 4 screws, 3mm x 15mm, are used for attaching the disc to the case 2 screws, 3mm x 30mm, are used for closing the case 1 Rilsan is used to keep the USB cable under pressure in the case. The output thread is made of filaflex Layer thickness: 0.2 Case thickness: 0.8 Fill rate: 20% Print temperature: 220°C No printing support