"Split Slick" - R/C Drift Wheel Kit

pinshape

Calling All Drifters with 3D Printers! This is a drift wheel I designed specifically for use with 1/10th scale drift cars. The wheel can be printed in various offsets based on the design you choose. Each file is labeled to indicate the offset, allowing you to easily change it by simply flipping the hub and reattaching it to the wheel. Printing without supports is possible. Recommendations: - Print the hub with strong filament such as T-Glass or Nylon, using 50-80% infill, and place it flat side down. - For the wheel, use PLA, ABS, PETG, or similar materials, ensuring a minimum wall thickness of 2mm and an optimal thickness of 4mm. Infill should be between 20-80%, with honeycomb structure and at least 5 layers on top and bottom. Hardware Requirements: - Five 2x8mm or 2x6mm cap hex screws per wheel are required. Tested on a Sakura D3 countersteer drifter with an offset of 13.5mm, measured from the top of the innermost part of the hex to the outside of the wheel. Dimensions: HEX = 12mm WIDTH = 26mm INNER DIAMETER = 45mm OUTER DIAMETER = 61mm