Splash Boy - Water toy

thingiverse

A fantastic Water toy gun perfect for playing with kids! It can shoot up to 8 meters! Material Needed: • Printed pieces. Choose one type of main tube (Simple, Handle, Handle+Gopro), One Nose needed, you can print different sizes if you want to try them • One 28mmx3.1mm oring. I used the biggest size from this kit: Amazon • Silicone grease: Amazon Print Recommendations: See the picture for the recommended printing orientation. No support needed. Layer size .12 or .2 mm, Wall count = 4, Infill = 40% (Nose, infill = 100%). Notes: • There are multiple nose hole sizes, I found that 4mm is a good tradeoff, I included nose files with 2mm, 4mm, 6mm and 8mm if you want to try other sizes • On the photos, I have a cylindric shaped nose cone on the blue one, it does not provide any benefits and is harder to print, so I went back to a flat design • On the photos, the red one has 5 ridges on the grip. We only have 4 fingers there, so I modified the design to have only 2 ridges • I am trying to work on a parametric version to be able to generate files for multiple oring sizes (Metric, Imperial). Really complex and it will take time Assembly Instructions: Youtube If you want to add the Gopro support, you will need a gopro metal nut. Hold it with metal pliers and heat it with a lighter. You will then be able to secure it in the socket. Have Fun!