Spirit Halloween Ghostbusters Life Size Pack GBFans Powercell Brackets

thingiverse

This is a set of brackets to make it easier to mount a GBFans Powercell board in the Spirit Halloween Life-Size Proton Pack (not the smaller Spirit Halloween Deluxe Proton Pack). https://www.gbfans.com/shop/electronics/power-cell-cyclotron-light-kit/ "T" for the top bracket and "B" for the bottom bracket. These are designed to fit over original diffused blue lens or a 1/4" thick clear dark blue acrylic. I do offer the dark Blue acrylic on eBay and GBFans (PM for info on GBFans) if you don't want to make one of those yourself. https://www.ebay.com/itm/195801401834 You will also need 4 small screws to mount the board to the bracket. I use "Steel Thread Rolling Screw for Plastic, Pan Head, Philips Drive, #2-28 Thread Size". The head size is a bit small but it works fine when tightened down. Also added a reflector with mounting for a GBFans cyclotron board. You would need to print 4 of these. I was able to print in this orientation without supports with a small layer thickness of 0.1. You can flip it over and if supports are needed it would not affect the looks since they would all be on the side that is not reflecting light. I like using a darker red filament and then replacing the existing diffuse red lenses with clear frosted lenses so that the different color cyclotron lights work as well as the red color. The darker red reflector makes the clear/frosted lens look more red even when the cyclotrons are off. 2 screws for each cyclotron should be fine, but you could use four on each one. I use "Steel Thread Rolling Screw for Plastic, Pan Head, Philips Drive, #2-28 Thread Size, 3/16" long".