Spinner - Two Part Assembly

thingiverse

Add support only for the top portion of the spinner, where the cross pin is facing outwards. No need to add support for the bottom portion of the spinner. Have fun printing, and let me know if the part feels too tight; I left a tolerance of 0.006 inches around the bottom cross hole. Read below for printer settings if necessary, but most standard settings should work fine: Nozzle Temperature: 206 degrees Celsius Bed Temperature: 54 degrees Celsius I opted for low resolution initially, but a layer on the round side was splitting from the transition area (bottom part); stick with standard 0.2mm layer height and it will print smoothly. I used three walls for added stability.