Spider decoration with web necklace

prusaprinters

<h3>Description</h3><p>Small spider to be used as prop for Witch costume.</p><h4>Spider</h4><p>The spider is included as one piece or separated to body and legs.<br>The separated model is better for printing (the leg printed laying on bed will be stronger and won't break), but you have to glue it together with superglue.</p><p>The one piece model is good for 50% size print as a small decoration. You can see in galery, that 0.4mm nozzle is maybe too big for it, but they still served well.</p><h4>Spider web necklace</h4><p>The Web model is ment to be used as “necklace” for the costume. Just stop the print after first layer, attach fabric over it and resume print. 3MF file for Prusa MINI included.<br>You can see the detailed guide on Billie Rubens blog here: <a href="https://www.billieruben.info/post/guide-3d-printing-onto-fabric">https://www.billieruben.info/post/guide-3d-printing-onto-fabric</a><br>I have used tulle as fabric and replaced masking tape with tiny magnets, as my tape was not able to hold onto the fabric well enough. Just be careful about location of magnets, so your probe and nozzle won't hit them.<br>Use the legs from multipart model to complete the necklace.</p><p>And if you use Prusa MINI and Octoprint, WARNING, the printer will not stop on M601 command from gcode. You can switch to “change color” command M600 or simply print this gcode from USB drive instead of Octoprint</p><h3>Printing</h3><p>Printed in Prusament PLA Galaxy Black</p><p>0.2mm layer height was OK for me</p><p>No supports</p><p>Brim only for legs for better adhesion</p>