Spherical Deck Box (MTG)

prusaprinters

<p>This Spherical shaped deck box will hold 100 double sleeved cards with a little extra space for tokens. There are two cutouts on the side of the main compartment made to hold a <a href="https://www.printables.com/model/269433-mtg-low-profile-life-tracker">low profile life tracker</a>. Additionally there is a small compartment under the lid for 16mm dice or other small accessories.</p><p>For closing the compartment under the lid you will need:<br>6 disk magnets 6mm (.25in) diameter, 1.5mm (.0625 in) thick</p><h5>Notes:</h5><ul><li>These parts have a nominal interlocking clearance of .10mm. This fit is intentionally a little tight. Due to this it is necessary for your printer to be properly calibrated for dimensional accuracy.</li></ul><h5>Assembly</h5><p>Once you have removed all the support material from part 1 and 2 carefully screw the threads together. If the threads start to stick DON'T force them, they can get stuck on high spots. Should this happens use a sand paper or a needle file to remove the high spots.</p><p>The extra compartment in the lid is held closed by 6 magnets. 3 attached to part 2 and 3 attached to part 3. Glue the magnets into the recessed holes on the respective parts make sure that the magnetic poles are aligned correctly.</p>