Spektrum FPV Monitor Mount

thingiverse

This text is specifically designed for Spektrum DX6, DX7, and DX8 models, as well as other Spektrum devices with the same antenna configuration. The mounting system clamps securely onto the two grooves surrounding the antenna, providing an extremely strong and stable attachment. The monitor should have a 45mm long slot at its rear end, into which the mount slides seamlessly. This design ensures optimal alignment and stability of the device. To assemble this mounting system, you will need the following components: * A 1/4-20 UNC A2 countersunk screw (3/8" to 1/2" in length) to secure the monitor to the mount. * Two 20mm M3 screws and two nuts. If longer screws are used, it may be necessary to drill a deeper hole. For convenience, both parts can be printed together using the larger .stl file (118kb). Please note that these two pieces are separated by a 0.5mm gap. Additionally, an optional neck strap balancer has been incorporated into this design, as the original mount's position is too far from the CG when the FPV monitor is attached. To assemble the neck strap balancer, you will need two 15mm M3 screws and nuts.