Speed Loader for Umarex Beretta M9A3 BB Air Pistol

thingiverse

Speed Loader for Umarex Beretta M9A3 BB Air Pistol This is a design (printed and tested) for a Speed Loader for the Umarex Beretta M9A3 BB gun. The top of the unit unscrews and a large number of BBs can be loaded, the Lid also has a Hex key to access the CO2 cartridge screw. The end of the unit has 2 small “pips” , use one of these to pull back the magazine spring (saves finger nails). To operate press the top plunger and shake, this needs to be done a few times until the delivery slot is full (16 BBs). This needs to be done as there is no anti-jam device in the hopper. Pull back the magazine spring using one of the pips on the bottom of the unit, then place the unit onto the magazine, there are two lugs in the base of the unit which mate slots in the magazine. Then press the lower plunger while the magazine is angled down so it loads the BBs I have included the Fusion 360 files if you want to make changes. You will need two lengths (21mm) of 3mm rod and two 5mm x 20mm springs. Nozzle 0.4mm Layer height 0.1mm Supports where required Have fun, shoot safely.