Sparsely Fulfilled Tree
thingiverse
An individualized version of http://www.thingiverse.com/thing:279864 was created using the Customizer! (http://www.thingiverse.com/apps/customizer/run?thing_id=279864). To achieve this design, options such as branch_twist_angle set at 90, trunk_length fixed at 40, minimum branching angle of 40, a root_min_ratio of 50, and length parameters ranging from 70% to 100%, were used. The tip's maximum ratio was set at 70, while the branch cross-section shape was defined as 6. Advanced settings were not utilized (use_advanced_settings = 0). The trunk radius is 16 and start budding position is set at 50. Other specifications include a branch diameter cutoff of 1.6, root maximum ratio of 60, continued growth for branches (branches_keep_growing = 1), allowed overhang angle of 50, maximum branching angle of 55, stop budding position at 60, and a custom shape defined by the given coordinates. The model was generated using a seed value of 27, with a maximum of five branching iterations, allowing two to three branches from each branch. However, all overhangs are not permitted (allow_all_overhangs = 0).
With this file you will be able to print Sparsely Fulfilled Tree with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Sparsely Fulfilled Tree.