Sparco simulator steering wheel - sim racing
thingiverse
DISCLAIMER: This steering wheel is not safe to use in a real car!!! Designed this steering wheel for my DIY force feedback racing simulator. The outer diameter is 350mm. Stuff needed: 6x m4 screws 6x m4 bolts 6x m5 bolts for the center adapter to your sim setup. Heat gun Glue Apply heat to the center structure piece (2 glued pieces) and bent to getall the needed angles (25°) for the outer ring to fit. (as shown on image, all red lines are the places you need to bend) Printing: The outer ring (4 parts) - build plate support needed for the round edges. Inner structure (2 parts) - no supports needed. 100% infill The infill is not really important, I did use 10%. Printed with fillamentum black PETG. Use epoxy or super glue for all the parts. (4 ring parts need to be glued together & 2 inside structure pieces need to be glued together) DISCLAIMER: This steering wheel is not safe to use in a real car!!!
With this file you will be able to print Sparco simulator steering wheel - sim racing with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Sparco simulator steering wheel - sim racing.