SpaceX Landing Pad Qi Wireless Charger

thingiverse

Does exactly as it claims on the packaging. Fast wireless charging (Max 10W) is fully supported without requiring any electrical knowledge or soldering skills. The screwless design allows for a simple installation process, where you just glue in the PCB and coil, then snap the two halves together securely. This Qi compliant charger works perfectly with any compatible device, I've successfully used it with an iPhone 8 and my Samsung Galaxy S9. It can fully charge my S9 in approximately 3.5 hours. The top half is a multi-part model that requires some patience to assemble correctly. I sliced the parts using PrusaSlicer and printed them on a Prusa MK3 without an MMU, if you want to do the same go to my upload here: https://www.prusaprinters.org/prints/5941-spacex-landing-pad-qi-wireless-charger You'll need: * Gikfun Qi Wireless Charger: available on Amazon at https://www.amazon.co.uk/Gikfun-Wireless-Charger-Circuit-Charging/dp/B07DC3JL89 * Micro USB power supply: you can purchase one from eBay at https://www.ebay.co.uk/itm/Power-Supply-Adapter-For-Raspberry-Pi-3-B-B-DC-5V-3A-5V-2-5A-US-UK-EU-AU-Plug/401651299500?hash=item5d844874ac:m:mex2ROYwdi4qPyJDE_oCRoQ&var=671396298789 * Alternatively, I use the official Raspberry Pi power supply: https://thepihut.com/products/raspberry-pi-official-universal-power-supply-5-1v-2-5a-black?ref=isp_rel_prd&isp_ref_pos=3&variant=20063164301374 * Rubber feet: available on eBay at https://www.ebay.co.uk/i/123918167071?chn=ps&norover=1&mkevt=1&mkrid=710-134428-41853-0&mkcid=2&itemid=123918167071&targetid=519877050686&device=c&mktype=pla&googleloc=1006912&poi=&campaignid=1782815751&mkgroupid=70885937682&rlsatarget=pla-519877050686&abcId=1139356&merchantid=137612064&gclid=EAIaIQobChMIh4-W1_H-5AIVibTtCh3Y7gmMEAkYAiABEgK8N_D_BwE * To secure the PCB and coil, I used some hot glue. A good 2-part epoxy would probably provide an even better hold but I used what I had available at the time and it seems to be holding up fine.