Space Succulent Germinator

cults3d

Space Succulent Germinator This design is an elegant growth stimulator of shoots in plants for indoor or outdoor, based on a "space freighter", its main function is to accelerate the growth of your garden or plantation based on the feng shui of your home, this process is based in increasing the flowering time of its roots. The sprout is placed in one of the upper holes of the "space freighter", ideally it would be to have fertilized or fertile soil, after a growth process of 5 or 6 days, said sprout is removed with the set of earth located in the opening which is very simple since it has a rounded shape, and is transplanted into the next larger container or garden, whatever the case. The spatial germinator is made up of a central piece which is printed in a single section, then the side "thrusters" are 6 separate items that must be glued with some adhesive according to the material used, the rear "thrusters" can be placed at pressure without the need for adhesive thanks to its design. The material I used to print it is PLA. The parameters that I use and recommend are: layer height: 0.15 -Wall line count: 3 -top layers: 5 -Filling: 10% -Speed: 50mm / s -Supports: without supports. -adherence to the printing plate: without adherence to the printing plate. Any query or recommendation is welcome. ------------------------------------Español------------------------------------ Space succulent germinator This design is an elegant stimulator of sprout growth in plants for indoor or outdoor, based on a "space freighter", its main function is to accelerate the growth of your garden or planting based on the feng shui of your home, this process is based on increasing the flowering time of their roots. The sprout is placed in one of the upper holes of the "space freighter", ideally be able to have fertilized soil or fertilizer, after a growth process of 5 or 6 days, the sprout is removed with the set of land located in the opening which is very simple because it has a rounded shape, and transplanted into the next larger container or garden whatever the case may be. The space sprouter consists of a central piece which is printed in a single section, then the side "propellants" are 6 separate items that must be glued with some adhesive according to the material used, the rear "propellants" can be placed under pressure without the need for adhesive thanks to its design. The material I used to print it is PLA. The parameters I use and recommend are: layer height: 0,15 -Number of wall lines: 3 -Upper layers: 5 -Fill: 10% -Speed: 50mm/s -Supports: no supports. -adherence to the printing plate: no adherence to the printing plate. any inquiry or recommendation is welcome.