Soyuz Numpad "Flipper" Case

prusaprinters

<p>A numpad to compliment my <a href="https://www.prusaprinters.org/prints/150497-quefrency-rev-3-flipper-case">Quefrency design</a>.</p><p>I used the PCB and plate from the Soyuz numpad kit, but you can could create your own num-pad plate and handwire it.</p><p>I also include a “linker” that sits under either side of the Quefrency case I made <a href="https://www.prusaprinters.org/prints/150497-quefrency-rev-3-flipper-case">here </a>and allows for the attachment of the numpad to it for a seamless look. The longer side goes under the the numpad while the shorter under the Quefrency.</p><p>Like with the original case, you can print flippers for the side as an accent.</p><p>I also include the combined model if you want to print as one piece. I printed each piece separate and screwed it all together and it turned out very clean. You will need M2 screws (6 M2x20mm for the sides and 4 M2x5 or 4mm to mount the plate)</p>