Sovol SV07 Plus Filament Sensor Mount

prusaprinters

***Update 1/24/24***I updated the Top T-Nut channel design a bit due to clearance issues I was having with a filament sensor case I made.  There is now a tab at the bottom for easier removal and the T-nut channel was moved up higher and further out from the gantry.  The file name is SV07Plus_GantryClip_Updated******I wanted to have my filament fed from a dry box and made this with the idea of eventually removing the filament spool holder from the top of the machine.  It clips into the same groove that the spool holder clips into.  I have included three models.  One is just the base clip without the T-nut mount.  The other two have the T-nut mount either on top of the clip or in front of it.  The main photo shows the top T-nut mount used.I do plan on making more changes to the models to nicen them up a bit, but they appear to be functional as they currently are.If you decide to remove it, I found it easiest to get the bottom unlatched, then press the top towards the front of the machine to get it unhooked.Requires an M3 T-Nut and an M3x12 screw (I think it was 12mm). ***NOTE***I was finding that using the front T nut channel like in the photo was creating more drag through my filament sensor and giving me flow and bed adhesion issues.  I switched back to the top T nut channel and it is working better.******Nothing too fancy for print settings.PLA+Infill - 15%No supports required if printed on side.