Sovol sv06 anti backlash

thingiverse

Here is a suitable improvised anti backlash nut for the sovol sv06.There is not much clearance at the top of the sovol between the z-axis stops and the bridge (24mm).Unfortunately, finished antibacklash nuts are too long. (I didn't find any. If there are suitable ones please let me know)You can use the adapter to install two standard spindle nut. (Here is the description for the standard spindle nut and adapter)https://www.thingiverse.com/thing:6384477You first have to see which holes match when you screw the nuts on top of each other. There shouldn't be too big of a gap between them otherwise it could become too long. Under no circumstances should they be screwed tightly together, otherwise the spring will not serve its purpose. If no hole fits properly, the top nut can be shortened slightly until it fits.what you need:to fix the bottom nut4 M3 x 16 screws4 M3 washersFor the top nut in my case4 M3 x 18mm (M3 x 20mm shortened)4 M3 nut2 compression spring0.8x12x40mmYou have to screw them in together then tighten the bottom screws through the holesIdeally, the compression spring should rest between the M3 nuts and the lower washers.