Sovol SV04 / SV01 pro 40mm fan duct

thingiverse

This was designed mainly for SV04 right and left extruders, but from what i can tell, SV01 pro has the same extruder type. you'll need to verify which one would fit on the SV01 pro as I don't own one. since I couldn't find a 40x20 fan duct for my SV04, I decided to make my own. I used two separate sources of STL files as a reference and modified them to work together as one piece. you will need (3) M3 screws + the (3) screws that were used for the original blower fan that were on your printer. VERY IMPORTANT: if you'll be using 12v Noctua fans like I did, then you'll need to reduce the voltage from 24v to 12v using buck converters and print a case for the buck converters. I printed a buck converter case and hid it in the back of x-axis plates. Also, make sure you use a voltmeter to test the polarity of the fan connector wires before connecting the buck converter. I used this case for the buck converter which fits perfectly at the back of the X-axis brackets https://www.thingiverse.com/thing:3458332 credits to the creators of the original STL files. https://www.thingiverse.com/thing:5207936 https://www.facebook.com/groups/sovol3d/permalink/1496617100775455 https://www.facebook.com/groups/sovol3d/permalink/1496617220775443