SOVOL SV02 Sailfin Direct Drive Mod

prusaprinters

<p>I didn't design anything here : this is a mix of the excellent Sailfin remix designed by SIVIS-JOE ( <a href="https://www.thingiverse.com/thing:5135793">https://www.thingiverse.com/thing:5135793</a> ) and the direct drive plate designed by MrHasBean for the SOVOL SV02.</p><p>Please note that I chosed to convert only one extruder to direct drive as I consider that it is overkill to convert both extruders.</p><p>I've been using this mod for &gt;100h printing, so far I consider this design is ok.</p><p>Additionnal parts needed :</p><ul><li>Pancake NEMA 17 motor having with integrated 10 teeth gear (those used for the voron Stealth burner, or the Sherpa / Sailfin / orbiter designs). Including at least 80cm cable. I use this one <a href="https://fr.aliexpress.com/item/1005003056906725.html">https://fr.aliexpress.com/item/1005003056906725.html</a></li><li>BMG dual extruder (clone) : all gears and parts will be reused except the body. You can find that for 10€ on aliexpress.</li><li>22.5mm bowden tube</li></ul><p>Unlike the original plate from MrHasBean , this time you won't need to drill a hole in the original sovol plate, I reused an existing one. You may need some spacers as my design is also compatible with my SV02 fan shroud design (see <a href="https://www.printables.com/fr/model/238818">https://www.printables.com/fr/model/238818</a> ).</p><p>A few supports are needed, but nothing difficult, see the picture. The two needed supports are shown, you can block all other supports.</p><p>Best results using 0.15mm layer</p><p>I printed it using PETG Carbon and HIPS Yellow. So far no problem, even for printing ABS.</p><p>Category: 3D Printer Parts</p>