Sovol SV01 Hotend Fan Holder

prusaprinters

<p>This is a replica of the hotend fan holder that holds the fan onto the hotend cooler. I reinforced the screwholes to make it stronger in that region. It fits 30mm fans.</p> <p>If you are slicing with Cura enable "Print Thin Walls". You don't need to rotate it or something. Just print it as it is.</p> <p>Print it with at least 4 walls.</p> <p>Best printed with PETG or ABS because they are more flexible and can withstand higher temperatures, but you can probably also use PLA if you anneal it before.</p> <p>I do not recommend to use the old screws since they are too short (even with the original holder). I recommend longer M3 screws.</p> <h3>UPDATES</h3> <p>Update 13.01.2020:</p> <ul> <li>Reinforced screwholes</li> <li>Uploaded two screwhole size version</li> </ul> <p>Update 31.01.2020</p> <ul> <li>Made screwholes deeper</li> <li>Reinforced the upper region</li> </ul> <p>Update 03.03.2020</p> <ul> <li>Completely overhauled the design and made it simpler</li> <li>Now only one screwhole version (2.85mm) that should fit all screws.</li> <li>Screwholes are now deeper (6.3mm)</li> </ul> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Creality</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>Ender 3 Pro</p></div> <p><strong>Rafts:</strong></p> <p>No</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div> <p><strong>Resolution:</strong></p> <p>0.12 - 0.16</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>30%</p></div> <p><strong>Filament:</strong> GEETECH PLA</p> </p></p></p> Category: 3D Printer Accessories