Sovol SV-01 5" LCD Frame

prusaprinters

<p>This design provides a frame &amp; mount for an <a href="https://www.aliexpress.com/item/3256801697118814.html">inexpensive 5" LCD</a> for running KlipperScreen on a <a href="https://amzn.to/3HCU36D">Sovol SV-01 printer</a>. &nbsp;It will likely fit many Ender-like printers which use a 2040 extrusion for their main frame.</p><p>BOM</p><ul><li>4x M5x12 BHCS</li><li>4x M5 T-nuts</li><li>4x M3 heatsets</li><li>4x M3x12 SHCS or BHCS (aesthetic choice)</li></ul><p><strong>Printing:</strong></p><p>Recommend ABS since it's near a hot printer, but unless it's in an enclosure PETG or even PLA should be fine. &nbsp;Tolerances aren't tight enough for filament shrinkage to matter much. &nbsp;Print with the screen cover face down and the flat portion of the back plate face down with the triangular mounting bracket sticking up. &nbsp;You *might* want a little support under the screw holes to keep the top sides (as printed) from sagging, but they'll probably come out okay without supports, and nobody's going see them. &nbsp;0.2mm is recommended so the various chamfers look decent.</p><p>The screen cover can be mounted either way up to accommodate how you want your cabling to go. &nbsp;You'll need to run HDMI and USB from your Pi to the screen.</p><p>Note the four 5mm holes in the flat part of the back plate are access holes for the M5 screws that hold the plate to the extrusion. &nbsp;No heatsets in those! &nbsp;The M3 heatsets go behind the four screws in the screen and both hold the screen in place and the cover on.</p>