Sorting Hat Bottle Opener - Euro version

prusaprinters

I really liked toddanglin design but sadly I didn't have any pennies (USD) laying around since I'm from Europe, but what I did have was Euro coins, so I started working on it. First things first, I started by looking at the penny (USD) dimensions to see what Euro coin would best match it or have approximate dimensions.Penny (USD): 19.05mm x 1.52mm2 cent (EUR): 18.75mm x 1.75mmThen I adjusted the hole dimensions to fit the 2 cent coin et voila!A Sorting Hat Bottle Opener for Hogwarts alumni that uses Euro coins. From the original design description, ipsis verbisFor the Harry Potter fan in your life, a Sorting Hat inspired bottle opener.“SLYTHERIN!”Print InstructionsOpening a bottle puts lots of strain on the print, so use stronger settings than usual to avoid tearing the print apart the first time you use it. (Ask me how I know…)Suggested settings with PLA:At least 25% infill with gyroid or cubic pattern (not unreasonable to use 100% infill for this application)0.2 mm or better layer height6 top/bottom solid layers4 shells/wallsNOTE: This is designed as a 2 color print. You will need to either manually change filaments, use a multi-material printer (like MMU), or a dual-nozzle printer.When slicing, add a pause just before the coin slot is covered so you can insert a 2 cent coin (EUR). The coin will be permanently encased in the print (no glue required).As pictured, using both black and brown PLA at 50% gyroid infill with 0.2mm layer height. Sliced in PrusaSlicer and printed on Prusa MK3S+/MMU2S (single extruder multi-material). CreditsSorting Hat Bottle Opener by toddanglin