Sortimentskasten für Widerstände 3(4) x 16 Fächer a 72 x 20 mm

thingiverse

For better organization of my resistances, I built a suitable box to store them in an orderly manner. Just for the record: The labeling of the compartments is still in progress. I have 3 drawer compartments with 16 compartments each. The side panels with the sliding tracks for the compartments are printed, and the bottom, top, and back panel plates are made from 4mm acrylic sheets. The connections are realized using M2.5 countersunk head screws. To do this, I drilled the holes in the side panels and the back wall to 2.5mm and sank them. At my place, I was able to screw the screws in without cutting the threads because the 2.4mm holes in the bottom and top plates turned out slightly smaller after printing and thus hold the threads well. A little glue on the connection surfaces is naturally also advantageous. Bottom plate: 168 x 148 x 4mm Top plate: 168 x 148 x 4mm Back panel: 157.2 x 57.5 x 4mm Update 18.10.2019 Expansion to 4 drawers: New are therefore - 4-side panel left - 4-side panel right - 4 plate back