Soporte Bobina Filamento

thingiverse

Human: I've tried various necessary work accessories, including wall-mounted supports for multiple spools found in the repositories, following 2 different designs (both with M8 threaded rod): \r\n1. Bar type with support at both ends, which proved laborious when changing mid-spools, \r\n2. Cantilever bar type, which incorporated additional mini-tensions and mini-vibrations to the filament and head, produced by the bar due to the pulling of the filament.\r\n\r\nTherefore, I decided to try desktop or shelf supports, portable and holding only one spool.\r\nAfter seeing many designs, none pleased me entirely, particularly because I want to combine them with pieces I already have, whose designs seem very good: \r\n1. Super cones for supporting each spool, by A_R_B (https://www.thingiverse.com/download:3448262)\r\n2. M8 presses from bewolff (https://www.thingiverse.com/thing:1666768).\r\n\r\nI decided to make a support myself, based on the simple idea of loveiu516 (https://www.thingiverse.com/thing:1087241) and arubia45's proposal to replace standard any cubic support pieces (https://www.thingiverse.com/thing:2897749).\r\n\r\nAlthough in the usage tests I haven't had any issues, I left some additional improvements: \r\n1. Holes for fixing a clean filament guide on the front crossbar.\r\n2. Holes for placing an anti-derailment or entanglement mechanism.\r\n3. Latch to place a holding screw and prevent soporte displacement.\r\n\r\nThis support is designed for spools with an outer diameter of up to 250 mm and a maximum width of 75 mm (in case of using the same cone and press system).\r\n\r\nNote: The uploaded .gcode files are those used in printing the image.