Sony E/FE lens mount

prusaprinters

<p>This is a printable model of the mount found on Sony E/FE lenses, which you can use to design accessories like extension tubes or custom lenses.</p> <p>Print at 0.1mm layer height, in PETG (recommended) or another filament like PLA.</p> <p>Two designs are included. One uses a 3D-printed slot for accepting the locking pin from the camera which matches that found on real lenses.</p> <p>The other design has a space for a brass M3 hex half-nut to receive the locking pin. A full nut can be used instead if you deepen the slot. This suits high torque requirements (i.e. it prevents the camera's locking pin from tearing through a plastic 3D-printed slot if the lens has a lot of torque applied after locking). Please do use a brass nut here, because a steel one can scratch both the camera's mount and locking pin.</p> <p>Design files have been provided in STL, STEP, and Fusion 360 project formats, so you can easily integrate this within your own designs.</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Prusa</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>I3 MK3S</p></div> <p><strong>Rafts:</strong></p> <p>No</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div> <p><strong>Resolution:</strong></p> <p>0.1mm</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>100%</p></div> <p><strong>Filament:</strong> Kiwi3D PETG Black</p> </p></p></p> Category: Camera