Sonic Pad universal 2020 V slot attachment

cults3d

Preface: I print out all my designs beforehand and test them to detect any errors. At least with my printer, everything works when I set things up. Another mounting option for the Sonic Pad. You attach the printed v-rail to your printer. Attach the bottom rail to the frame and Now slide the 2nd rail with the bracket into each other like a T-slot and attach the Sonic Pad there. You can now simply remove the pad by pulling it out and inserting it again without screwing it in. if you use the lower threads on the pad, the pad sits so high that the door still opens even with a housing. You can also tilt the pad up and down. I have the Ender 5 S1 here and attach it to the front of the frame as shown in the pictures. Otherwise I would have to unscrew it completely if I wanted to insert something into the V slot. So I attach the printed rail there and insert the bracket into this rail, You need 2X M3 screws if the existing ones are not enough to attach the pad to the original threads in the pad As well as 2 T-slot stones and screws for your printer to attach the lower rail to the profile.